Setting Timeout Periods for Daemons, Queries, and Sessions
Depending on how busy your CDH cluster is, you might increase or decrease various timeout values. Increase timeouts if Impala is cancelling operations prematurely, when the system is responding slower than usual but the operations are still successful if given extra time. Decrease timeouts if operations are idle or hanging for long periods, and the idle or hung operations are consuming resources and reducing concurrency.
Increasing the Statestore Timeout
If you have an extensive Impala schema, for example with hundreds of databases, tens of thousands of tables, and so on, you might encounter timeout errors during startup as the Impala catalog service broadcasts metadata to all the Impala nodes using the statestore service. To avoid such timeout errors on startup, increase the statestore timeout value from its default of 10 seconds. Specify the timeout value using the -statestore_subscriber_timeout_seconds option for the statestore service, using the configuration instructions in Modifying Impala Startup Options. The symptom of this problem is messages in the impalad log such as:
Connection with state-store lost Trying to re-register with state-store
See Scalability Considerations for the Impala Statestore for more details about statestore operation and settings on clusters with a large number of Impala-related objects such as tables and partitions.
Setting the Idle Query and Idle Session Timeouts for impalad
To keep long-running queries or idle sessions from tying up cluster resources, you can set timeout intervals for both individual queries, and entire sessions.
Specify the following startup options for the impalad daemon:
The --idle_query_timeout option specifies the time in seconds after which an idle query is cancelled. This could be a query whose results were all fetched but was never closed, or one whose results were partially fetched and then the client program stopped requesting further results. This condition is most likely to occur in a client program using the JDBC or ODBC interfaces, rather than in the interactive impala-shell interpreter. Once the query is cancelled, the client program cannot retrieve any further results.
You can reduce the idle query timeout by using the QUERY_TIMEOUT_S query option. Any value specified for the --idle_query_timeout startup option serves as an upper limit for the QUERY_TIMEOUT_S query option. See QUERY_TIMEOUT_S Query Option (CDH 5.2 or higher only) for details.
The --idle_session_timeout option specifies the time in seconds after which an idle session is expired. A session is idle when no activity is occurring for any of the queries in that session, and the session has not started any new queries. Once a session is expired, you cannot issue any new query requests to it. The session remains open, but the only operation you can perform is to close it. The default value of 0 means that sessions never expire.
For instructions on changing impalad startup options, see Modifying Impala Startup Options.
Setting Timeout and Retries for Thrift Connections to the Backend Client
Impala connections to the backend client are subject to failure in cases when the network is momentarily overloaded. To avoid failed queries due to transient network problems, you can configure the number of Thrift connection retries using the following option:
- The --backend_client_connection_num_retries option specifies the number of times Impala will try connecting to the backend client after the first connection attempt fails. By default, impalad will attempt three re-connections before it returns a failure.
You can configure timeouts for sending and receiving data from the backend client. Therefore, if for some reason a query hangs, instead of waiting indefinitely for a response, Impala will terminate the connection after a configurable timeout.
- The --backend_client_rpc_timeout_ms option can be used to specify the number of milliseconds Impala should wait for a response from the backend client before it terminates the connection and signals a failure. The default value for this property is 300000 milliseconds, or 5 minutes.
Cancelling a Query
Sometimes, an Impala query might run for an unexpectedly long time, tying up resources in the cluster. You can cancel the query explicitly, independent of the timeout period, by going into the web UI for the impalad host (on port 25000 by default), and using the link on the /queries tab to cancel the running query. Various client applications let you interactively cancel queries submitted or monitored through those applications. For example, by pressing ^C in impala-shell, clicking the Cancel button from the Watch page in Hue, clicking Actions > Cancel from the Queries list in Cloudera Manager, and so on.